AG8: CMOS Settings won't save

Discussion in 'Abit' started by John Simons, Jun 30, 2005.

  1. John Simons

    John Simons Guest

    Just installed the ABIT AG8 mobo with an Intel P4 3.0ghz processor and
    Kingston 333mhz 512MB memory along with a Maxtor 120GB sata HDD. Cleared
    the BIOS, then went into Guru and setup my CMOS settings. When finished,
    went to "Save and Exit", hit <enter>, and nothing. System hangs, have to
    reboot it. Of course, I lose all my settings. Shut down, clear the BIOS,
    start again. Same results. CPU settings appear to be normal, nothing
    seems to be set incorrectly.

    Has anyone experienced this problem and if so how did they correct it?
    John Simons, Jun 30, 2005
    1. Advertisements

  2. John Simons

    Flintstone Guest

    Flintstone, Jul 1, 2005
    1. Advertisements

  3. John Simons

    straiton Guest

    i had similar probs with an Abit AV8 with bios 20(b4 21 was available,
    anyway).Settings didn't seem to save sometimes.Went back to previous bios
    19, until the 21(latest) came out.Everything seems ok now.

    Abit AV8 Third Eye v1.1, A64 3200+ at 2400(9x267),1.55V CPU
    DIY watercool
    Radeon Sapphire 9700
    straiton, Jul 2, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.