AN7 Memory Question- memory slot configuration Dual channel operation

Discussion in 'Abit' started by John Borges, Jan 1, 2004.

  1. John Borges

    John Borges Guest

    I am an AN7 board with two sticks of 256 meg ram in slots 1 and 3. I
    verified that I am getting dual channel operation using the program
    "CPUZ" and by comparing benchmarks in Sandra.

    I've read on another post that it might be possible to increase my ram
    to 1 gig by putting both 256 meg sticks in slots 1 and 2 and putting a
    512 module in slot 3. Has anyone tried this?
     
    John Borges, Jan 1, 2004
    #1

    1. Advertisements

  2. John Borges

    maniac Guest

    Yeah. It works fine.

    256 MB Samsung PC333 TCB3 chips - Slot 3
    256 MB Kingston PC400 Micron chips - Slot2
    512 MB Kingston HyperX PC466 - Slot1

    Memory Clock: 460 MHz (230 MHz FSB Sync with RAM Clock)
    CL: 2-2-2-11

    Abit NF7-S 2.0 2.1 BIOS
     
    maniac, Jan 1, 2004
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. NF7-S v2.0 Dual Channel slot population issue- not the same question that's on here six times, i hop

  2. P4G8X Dual Channel Memory configuration

  3. P5AD2-E Premium - Memory configuration (dual channel)

  4. Memory Q: 1gb dual channel 320mhz or 2gb single channel 266mhz?

  5. Can I use a dual channel (800 FSB) on a non-dual channel board

  6. dual channel ram configuration for dual processors on Asus K8N-DL

  7. Dual Channel Memory on Single Channel boards?

  8. To Dual Channel or Not to Dual Channel, That is ...

Loading...