Asus An8-SLI Premium SATA RAID question

Discussion in 'Asus' started by scott1960, Sep 28, 2006.

  1. scott1960

    scott1960

    Joined:
    Sep 28, 2006
    Messages:
    4
    Likes Received:
    0
    Location:
    Pittsburgh
    My first post.
    I am an experienced system builder, but having less exp. w/sata and raid.

    I am migrating from an A8V Deluxe using a RAID 0 boot on XP. This board uses VIA drivers at SATA 150. My 2 WD 250 are set to 150 but will do 300.
    I had hoped/expected to just plug these in and boot my new A8N-SLI Prem. sytem up. So I pulled my 150 setting jumpers (on the WD's) and booted.

    Zip, nana.
    Put them back in my old system
    Zip, nada.

    Have I just lost 30GB of photos? (yes, about 90% are backed up) :confused: :(
    Thanks for reading and advising me.
    Nvidia drivers wanted to setup a RAID at boot, (F10) I did not let it as I thought it means wipe me out???

    Regards,
    Scott
     
    scott1960, Sep 28, 2006
    #1
  2. scott1960

    scott1960

    Joined:
    Sep 28, 2006
    Messages:
    4
    Likes Received:
    0
    Location:
    Pittsburgh
    Ok, you have to do a fresh install. So problem solved. (AKA yes I am f'd)

    :)
     
    scott1960, Sep 29, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. A8N-SLI Premium problems! ARGH!

  2. Asus An8-SLI Premium SATA RAID question

  3. P5AD2-E Premium cannot instal XP on SATA

  4. A8N-SLI Premium wont boot from hardrive

  5. BIOS not fully ACPI compliant (M2N32-SLI Premium Vista Ed.)

  6. 945P Neo does not detect sata hard disks if sata mode set to RAID

  7. Abit AN8 AMD freezing

  8. AN8-SLI Won't Start

Loading...