asus p5vd2-mx wont boot, just beeps

Discussion in 'Asus' started by takura, Jul 11, 2007.

  1. takura

    takura

    Joined:
    Jul 11, 2007
    Messages:
    2
    Likes Received:
    0
    I built my pc from scratch and when i started up i got a long beep and two short beeps continuously and no video display

    the specs are P4 3.0 ghz hyper threading
    ASUS P5VD2-MX motherboard
    1 gig of ram, A DATA
    160 gb seagate sata hardrive

    i read somewhere that i should try to clear the cmos, and i did so and it posted but did not read my sata hard drive, and it says CMOS CHECKSUM ERROR then when i restart the beeping starts again.

    please help, i need this computer and don't know what to do
     
    takura, Jul 11, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. AX3SP Pro mobo: no boot/just standby, that's it.

  2. k8v se deluxe just 4x agp?

  3. GA-8IPE1000 won't boot, beeps continuously

  4. p5vd2 front panel audio, help please!

  5. d945gnt No boot video or beeps

  6. A8V No boot video or beeps. Help

  7. M2N SLI DELUX - No boot or beeps

  8. Asus A88XM wont boot in W10 unless F2 is held

Loading...