AX3SP Pro mobo: no boot/just standby, that's it.

Discussion in 'AOpen' started by spiderrasmon, Sep 18, 2006.

  1. spiderrasmon

    spiderrasmon

    Joined:
    Sep 18, 2006
    Messages:
    1
    Likes Received:
    0
    Got this desktop from my brother-in-law just 2 wks. ago, started up fine at his place.

    I cannot get it to start up-- thought it might be one of the jumpers for power switch (power sw), but they're all set correctly.

    AOpen Power Supply (300W) works fine, I tested it on another machine, but this one is supposed to be an upgrade from my current desktop, so I'm not going back to the old one.

    Only time that the power supply fan works on this board is when I put the P1 connector quarter- to half-way into the board. The Boot LED also lights up.
    But if I push the P1 connector all the way in, it doesn't boot, the fan doesn't turn, and the only thing that is on is the Standby LED.

    I removed all peripherals for the time being to keep testing, but I'm at my wits end.

    :eek: :(
     
    spiderrasmon, Sep 18, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.