AX4SPE Max Power up problem

Discussion in 'AOpen' started by Jerry Gaultney, Oct 10, 2003.

  1. Jerry Gaultney

    Jerry Gaultney Guest

    I'm installing the new board with P4 2.80 ghz processor and have been unable
    to get the system to powerup. I've tried all the normal things; check
    cables and connection, etc. but only get the amber light on the mainboard.
    Does anyone have a suggestion.

    J. Gaultney
     
    Jerry Gaultney, Oct 10, 2003
    #1

    1. Advertisements

  2. Jerry Gaultney

    finflash Guest

    Make sure you have a pentium 4 compatible power supply (two power
    connectors) with at least 300 W output . Then try removing one device
    /cable at the time until only the cpu,cpu fan cable and the power button
    cable remains , If it still refuses to boot it's RMA time .
    Good luck
    / the finn
     
    finflash, Oct 29, 2003
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. AX4SPE-Max USB2.0 not working

  2. AX4SPE-MAX and Linux

  3. AX4SPE Max / 1 SATA and 2 IDE drives - config help

  4. AX4SPE-Max - BIOS Flashing Diaster - help?

  5. ax4spe max ii hard drive wrong

  6. AX4SPE-MAX / poor SATA HD performance

  7. AX4SPE MAX II

Loading...