AX4SPE-N DDR RAM speed help

Discussion in 'AOpen' started by dwave, Aug 23, 2003.

  1. dwave

    dwave Guest

    I am building a system with the following components:

    AX4SPE-N, Celeron 2.2, 512MB 333Mhz DDR Ram, GeForce4 FX5200...

    Why does the BIOS report my Ram as running at 266Mhz? On boot up the
    BIOS report shows DDR Ram as "Default 333 / Current 266 Voltage
    Auto/Auto" ??? In the BIOS settings I have DDR Bus Freq set to Auto
    and the only other option is 2.66.

    Does anyone know how I can get the Ram running at 333Mhz?

    Thanks

    8^D
     
    dwave, Aug 23, 2003
    #1

    1. Advertisements

  2. dwave

    wizza Guest

    this is because you are using a 400mhz bus cpu. With I845 motherboard, in
    order to be able to use DDR 333mhz, you need to use 533mhz bus cpu (like p4
    B). So unless you overclock your cpu bus, you cannot run your ram at 333mhz
    with a celeron.

    Wizza
     
    wizza, Aug 24, 2003
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Interesting AX4SPE-N RAM discovery

  2. AX4SPE Max / 1 SATA and 2 IDE drives - config help

  3. AX4SPE-Max - BIOS Flashing Diaster - help?

  4. Asus P4P800, checking DDR ram speed with XP?

  5. would a ddr pc3200 ram at 333 Mhz perform worst than a ddr2700 at the same 333 bus speed?

  6. RAM, DDR 500 better than DDR 400?

  7. Is higher DDR speed than FSB speed ok?

  8. Need help with video card upgrade for AX4SPE MAX

Loading...