AX59Pro Question

Discussion in 'AOpen' started by John and Pat Ochenduszko, Jul 23, 2003.

  1. A bit of an old motherboard but I am using it to power a second system for
    the grandkids. I just want to verify a setting on the MB. If I set the DRAM
    clock to run at the speed of the AGP slot instead of the CPU, then it will
    be running at 66 MHz and not 100...correct? Thanks for any information.
    Reason being...I have 66 MHz RAM and not 100 to throw into the system.

    Regards,
    John O.
     
    John and Pat Ochenduszko, Jul 23, 2003
    #1
    1. Advertisements

  2. Yes, that is correct. If your FSB is set to 100MHz and DRAM
    Clock is set to AGP, your memory will run at 66MHz.
    the system.
     
    Michael J. Apollyon, Jul 23, 2003
    #2
    1. Advertisements

  3. Thanks for the information, it is appreciated. Just wanted to be sure before
    putting this puppy together.

    Regards,
    John O.
     
    John and Pat Ochenduszko, Jul 24, 2003
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.