BE6-2 and FX5200

[Michael Mueller]

I try this combination and got only 3 beeps.
Are there any known issues?

Michael

 

[TomG]

don't know if that AGP slot supports that AGP board, being a 1.5 volt only AGP board. could be wrong on that...

 

[Spajky]

On Thu, 6 Nov 2003 16:30:17 -0500, "TomG"
wrote:

don't know if that AGP slot supports that AGP board, being a 1.5 volt only AGP board. could be wrong on that...

depends on which chip the manufacturer has used for Agp translate signaling; some those work on AGP2x (3V), some do not...

about FX5200: if the card has 2 cutouts at PCB on the board (approx. @ 1/3 &2/3 at AGP connector will run on AGP2x (universal agp connector) w/o problem on that board ...

-- Regards, SPAJKY
& visit site - http://www.spajky.vze.com
Celly-III OC-ed,"Tualatin on BX-Slot1-MoBo!"
E-mail AntiSpam: remove ##

 

[Bob Troll]

Doesn't 3 beeps mean the board isn't seated all the way?

Michael Mueller wrote:

I try this combination and got only 3 beeps. Are there any known issues?

Michael