BH6 problem with Tualatin, reset on OpenGL

[Goran (archive)]

Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus S370-DL adapter. Simple modification... 3 pins insulated and two interconnected. It seems that everything works well except when I start 3D screensaver (which uses openGL) I get instant RESET (as when reset button is pushed). Half an hour ago, I got system reset for no reason at all. Now I'm a bit worried. Anyone has any idea??? Please? Goran

 

[GTD]

On Sun, 6 Jul 2003 23:34:49 +0200, "Goran"
wrote:

Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus S370-DL adapter. Simple modification... 3 pins insulated and two interconnected. It seems that everything works well except when I start 3D screensaver (which uses openGL) I get instant RESET (as when reset button is pushed). Half an hour ago, I got system reset for no reason at all. Now I'm a bit worried. Anyone has any idea??? Please? Goran

If you're using XP, there's an option to restart the computer upon system failure. If you uncheck this (control panel, system, advanced, startup and recovery), you may be able to see more of why this is happening (no doubt you'll still have the crash, but maybe it will allow you to narrow down the cause of the crash)

 

[Thagor]

That goes for Win2K also. Turn off the automatic reboot function and do some anal. Is this a Rev 1 or Rev 1.1 board? Are you comfortable that the mod is done correctly? Note that some have had to reinstall Direct-X and video drivers to get stability.

"GTD" wrote:

On Sun, 6 Jul 2003 23:34:49 +0200, "Goran"
wrote:

Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus S370-DL adapter. Simple modification... 3 pins insulated and two interconnected. It seems that everything works well except when I start 3D screensaver (which uses openGL) I get instant RESET (as when reset button is pushed). Half an hour ago, I got system reset for no reason at all. Now I'm a bit worried.
Anyone has any idea??? Please?
Goran

If you're using XP, there's an option to restart the computer upon system failure. If you uncheck this (control panel, system, advanced, startup and recovery), you may be able to see more of why this is happening (no doubt you'll still have the crash, but maybe it will allow you to narrow down the cause of the crash)

-----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

 

[Goran (archive)]

"Thagor" wrote:

That goes for Win2K also. Turn off the automatic reboot function and do some anal. Is this a Rev 1 or Rev 1.1 board? Are you comfortable that the mod is done correctly?
Note that some have had to reinstall Direct-X and video drivers to get stability.

This is Rev 1 board. Mod is done by the book... After first crash I removed CPU, checked isolation and connection with instrument... used another slotket (MSI) but nothing changed. Reinstaled Direct-X... same. My primary OS is Win98... on XP it seems that it works fine... but not done some serious testing... will do so... thanks Goran

 

[Goran (archive)]

"GTD" wrote:

If you're using XP, there's an option to restart the computer upon system failure. If you uncheck this (control panel, system, advanced, startup and recovery), you may be able to see more of why this is happening (no doubt you'll still have the crash, but maybe it will allow you to narrow down the cause of the crash)

Thanks, but it seems that it's stable on XP. I have to do some more testing. I have dual boot and using win98 as my main OS... and the problem is there. I have reinstaled Direct-X but nothing changed... Is there any program for thorough CPU testing and diagnosis? Goran

 

[Spajky]

On Sun, 6 Jul 2003 23:34:49 +0200, "Goran"
wrote:

Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus S370-DL adapter. Simple modification... 3 pins insulated and two interconnected. It seems that everything works well except when I start 3D screensaver (which uses openGL) I get instant RESET

instead of using ak4bridge to ak26, use an11 !
Ups, like I recall for that slotket, you even do NOT need that bridge !!!

Lower your Vcore to 1,5V & do not pass 1,35GHz if OC-ing! mount extra HSs to Voltage mosfets & check your PSU & caps.

See also my site!

-- Regards, SPAJKY
- http://freeweb.siol.net/jerman55/HP/Spajky.htm
Celly-III OC-ed "Tualatin on BX-Slot1-MoBo!"
E-mail AntiSpam: remove ##