1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

Can't access my Sun X2270 Fire Server BIOS/ILOM

Discussion in 'Sun Hardware' started by Lothar Scholz, Mar 27, 2014.

  1. I just purchased two 2nd hand Sun X2270 Intel servers and i can't boot or access them. They have a Service Processor installed but i don't get any signal on VGA output.

    If i add an ethernet to the SP i see the cable network lights but can't access them and they don't show up in the DHCP in my (cheap AMV DSL home router). If the previous owner has set a fixed IP how can i reset the data. Reseting the CMOS did not help at all.

    I have unfortunately not a Seriell <-> RJ45 cable to use the console. But why does an attached VGA and USB keyboard not work to get into the BIOS/ILOM?
     
    Lothar Scholz, Mar 27, 2014
    #1
    1. Advertisements

  2. VGA doesn't get you access to the ILOM, only to the system itself; you need
    to power it on using the front powerbutton.

    Casper
     
    Casper H.S. Dik, Mar 27, 2014
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.