Changing the video output "in the dark".

Discussion in 'Gateway' started by Torleifg, Nov 17, 2007.

  1. Torleifg

    Torleifg

    Joined:
    Nov 17, 2007
    Messages:
    1
    Likes Received:
    0
    I have a Gateway 702GE, that i think is sending the video to the AGP slot. AT least there is no video coming out of the integrated graphics chip. Unfortunately I don't have an AGP video card. My plan is to try to go into BIOS without actually seeing it, and changing the video back to PCI(integrated). With the screenshots of the menu pages in the BIOS, I should be able to.

    If someone has this 702GE, or probably any in the 700 series with integrated graphics, you could possibly record the exact keystrokes from boot. But be careful to not set it to AGP, if you don't have one.


    Thanks,
    Torleif
     
    Torleifg, Nov 17, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Changing New motherboard

  2. ALL-In-Wonder 9000 output cables on AIW 9600?

  3. The Enigma of the Asus A8n5x and the video that only displays when cmos is reset

  4. CMOS date keeps changing

  5. FTDI output rate- PLZ HELP

  6. No video output

  7. Will changing memory type cause issues

  8. Changing splash

Loading...