1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

Creative m0003 won't boot!!!

Discussion in 'Intel' started by pdqwik, Dec 11, 2003.

  1. pdqwik

    pdqwik Guest

    I believe this is nothing but a bx440 board with a creative platinum blaster
    chip integrated. The cmos was reset with the power cord plugged in numerous
    times which caused the comp. to boot. Eventually the comp. would not boot
    at all, just giving a series of long continuous beeps. I believe he fried
    or corrupted his bios. Would like to try a rescue by pulling the bios chip
    and inserting it into a like computer that is already booted and trying to
    reflash it. My questions are 2. Can this be done? Will it work? And there
    is a J17 that allows you to flash at 5 or 12 volts. Which would be
    appropriate and work best? I know that is 3 Questions but and understanding
    that I could get would boost my confidence level. I have flashed a bios
    only once. TIA
    pdqwik, Dec 11, 2003
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.