1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

D845PEBT2 MB and USB2.0 devices ? Can't get 2 USB2.0 devices to work at once.

Discussion in 'Intel' started by Phil Tomaskovic, Dec 13, 2003.

  1. Phil Tomaskovic

    Phil Tomaskovic Guest

    I have my case (Kingwin) front usb port connected to the onboard usb
    connectors. I cannot connect 2 usb2.0 devices at the same time. The second
    one will not be recognized by XP also it doesn't appear to get power (eg, no
    led lit on card reader). If I connect a 1.0 usb and 2.0 usb device, both
    work fine. Should 2 usb 2.0 devices be able to run at the same time?

    I had seen this when I had a HP 300e dvd burner and ADS hard drive kit both
    connected to the PC and thought it was some conflict. But now I just got a
    2.0 Sandisk card reader and it also won't work if the HP burner is plugged
    in. So I then unplugged the HP and found the Sandisk and ADS drives also
    won't work. If the Sandisk is plugged in second, XP pops up with a USB
    device not recognized error, also no leds light up on the Sandisk and they
    light up right away if I plug it in first.
     
    Phil Tomaskovic, Dec 13, 2003
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. D845PEBT2 with 1394

  2. D845PEBT2 + Linux anybody?

  3. Again on D845PEBT2 pls help me.

  4. Recording from multiple windows audio devices at once?

  5. Could someone tell how I can get USB2.0 work in my notebook?

  6. Are too many USB devices plugged in at once "bad" for a iMac?

Loading...