1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

debugging

Discussion in 'Embedded' started by Michail Gkiourtas, Oct 11, 2003.

  1. Is it necessary to debug the code autmatically produced (by tools such
    as The Real-Time Wokshop,Telelogic etc) using ISS or an emulator
    or field testing?
    Thanks.
     
    Michail Gkiourtas, Oct 11, 2003
    #1
    1. Advertisements

  2. Michail Gkiourtas

    CBarn24050 Guest

    very nessasary
     
    CBarn24050, Oct 11, 2003
    #2
    1. Advertisements

  3. You mean the software does automatically what you intended it to do ?
    Great.
    Are you sure you understood the requirements for the project ?
    Great.
    Now you believe the software does what the project requires it
    to do ?
    Great.
    Just in case you were wrong in one point, what goes wrong
    when it is actually connected to the reality ?
    Can you justify not having it tested ?

    Since you're asking this question you're unlikely :
    -going to pull this sofware up after a 3 hour flight to a customer
    -controlling valuable and potentially dangerous gear such as
    power stations, medical devices, production plants

    Rene
     
    Rene Tschaggelar, Oct 11, 2003
    #3
  4. You mean the software automatically does what you intended it to do ?
    Great.
    You're sure to have understood the requirements of this project correctly ?
    Great.
    You believe the software does therefore what the project requires it to do ?
    Great.
    Just in case you made a mistake, what can go wrong when you connect
    it to the actual reality.
    Can you justify not to test it ?

    From the way you ask this question, you're not going :
    -to pull this software up after a 3hour flight to a customer
    -to control valuable and potentially dangerous equipment such as
    power stations, production plants, medical equipment

    Rene
     
    Rene Tschaggelar, Oct 11, 2003
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.