Dual Opteron [S2880] power-up problem

Discussion in 'Tyan' started by Joaco, Dec 30, 2003.

  1. Joaco

    Joaco Guest

    Mobo: Tyan Thunder K8S - S2880

    CPU1: installed AMD 242 Opteron
    CPU2: none
    Memory: installed DIMM1 Infineon PC2100R
    (256Mb,DDR,133Mhz,CL2,ECC,Reg)
    Power Supply: A+GPB Power 500W EPS-12V
    (Tested OK, stand-alone by vendor)

    Problem:
    On power-on, the KBD leds flash once, the CPU fan
    and the PS fan do not start, no beeps from POST.

    How should I proceed to test this situation?
    Is this a mobo short or CPU short?

    Thanks for any suggestions
    Tony Borras
     
    Joaco, Dec 30, 2003
    #1
    1. Advertisements

  2. Hi, check the manual, you must have single Opteron in right socket with AGP
    support.

    www.lynncomp.com
     
    Doug & Raye Lynn, Jan 18, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.