Duron AppleBred 1400Mhz and NF7 v2.0

[Darek /Cypiz/ Nowak]

hello guys!

Do I have to load latest BIOS for NF7 v2.0 if I want to insert Duron Applebred 1400 mixhb 0333vpmw???...

...or leave factory BIOS and insert this CPU, without wondering about, will it works or not?

 

[Usenetter]

You can use any BIOS you choose.
The best for O/C'ing is d10 - but if you use SATA, download Mwarhead's 2.45a drivers.

"Darek /Cypiz/ Nowak" wrote:

hello guys!

Do I have to load latest BIOS for NF7 v2.0 if I want to insert Duron Applebred 1400 mixhb 0333vpmw???...

...or leave factory BIOS and insert this CPU, without wondering about, will it works or not?

--
greetings Darek /Cypiz/ Nowak
JabberID:

 

["Jens C. Hansen [Odense]" "[usenet][greylion]=[dk]

Darek /Cypiz/ Nowak wrote:

Do I have to load latest BIOS for NF7 v2.0 if I want to insert Duron Applebred 1400 mixhb 0333vpmw?

It might work with factory Bios, but it will probably show up as <Unknown CPU> or something like that, and you will probably also have to set the right FSB and maybe multiplier yourself. This will also have to be done after every time the reset cmos jumper is used.

In other words; update the Bios, it will save you some trouble.

 

[Darek /Cypiz/ Nowak]

"Usenetter" zapodales(as)/wrote:

You can use any BIOS you choose.
The best for O/C'ing is d10 - but if you use SATA,

Well I don't have SATA, because it's NF7 v2.0

 

[Darek /Cypiz/ Nowak]

"Jens C. Hansen [Odense]" <"[usenet]ďż˝[greylion]=[dk]"> zapodales(as)/wrote:

It might work with factory Bios, but it will probably show up as <Unknown CPU> or something like that,

I thought so...

and you will probably also have to
set the right FSB and maybe multiplier yourself.
In other words; update the Bios, it will save you some trouble.

ok, I'll try D10 like usenetter said

 

[Usenetter]

"Usenetter" wrote:

You can use any BIOS you choose.
The best for O/C'ing is d10 - but if you use SATA, download Mwarhead's 2.45a drivers.

Correction : Mwarhead's revised d10 BIOS.

"Darek /Cypiz/ Nowak" wrote:

hello guys!

Do I have to load latest BIOS for NF7 v2.0 if I want to insert Duron Applebred 1400 mixhb 0333vpmw???...

...or leave factory BIOS and insert this CPU, without wondering about, will it works or not?

--
...