I am confused as to how to set the boot sequence after getting in to the BIOS. I know this is a very simple procedure but I just can't, as they say "get my head round it" Does anyone know where there is clear information on how this is done? Thanks Steve
F1A 55-MLX Motherboard BIOS
- Thread starter steevy2
- Start date
- Joined
- Jan 21, 2025
- Messages
- 1
- Reaction score
- 0
Hey, its ok to feel overwhelmed. Go step by step.
Once you have entered BIOS, look for the boot tab (you'll find it at the top of the screen). If you don't find it here, find and select "Advanced Mode" first and then you'll see boot tab.
There, select your boot device (whatever you are intended to choose) to set it as the first option and press Enter. Similarly, select the second and third priority devices. Done? Press F10 to save your changes and exit.
Confirm by selecting Yes or pressing Enter when prompted.
P.S: Disable any of these: Fast Boot or UEFI-only boot, Boot over ride, if you find them along the way. As they may interfere with your configuration by selecting a device for a one-time boot without changing the boot order.
As simple as that
Once you have entered BIOS, look for the boot tab (you'll find it at the top of the screen). If you don't find it here, find and select "Advanced Mode" first and then you'll see boot tab.
There, select your boot device (whatever you are intended to choose) to set it as the first option and press Enter. Similarly, select the second and third priority devices. Done? Press F10 to save your changes and exit.
Confirm by selecting Yes or pressing Enter when prompted.
P.S: Disable any of these: Fast Boot or UEFI-only boot, Boot over ride, if you find them along the way. As they may interfere with your configuration by selecting a device for a one-time boot without changing the boot order.
As simple as that