1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

Far cry with a 9800 Pro, and The 9800 with a Viewsonic PF-790 questions....

Discussion in 'ATI' started by Newf !!!, Jun 23, 2004.

  1. Newf !!!

    Newf !!! Guest

    1. Anyone out there with a P4-3.0 gig, and a 9800 pro 128 meg
    version, say 512 ram etc, able to play far cry in 1280x1024 with all
    settings on at a decent frame rate?

    CAn you post the frame rate from say a benchmark like benchemall so I
    can compare to mine?

    www.benchemall.com

    2. I have a PF-790 Veiwsonic 19" monitor. It uses a Diamondtron (
    Sony/mitsu) Tube. Any Ghosting issues with this card and monitor
    combination? I ask because some old ati's did have an issue with Sony
    tube's.




    TIA
     
    Newf !!!, Jun 23, 2004
    #1
    1. Advertisements

  2. Newf !!!

    melodium Guest

    have a p4 2.8 - same card - frame rate is decent, but really started
    to shine when added another 512 - everything on high - but 1280x960

    with 512, there were constant pauses -
    with 1024 pauses are gone - some really dense jungle levels tho
    it seems to be sluggish, not jerky - but only some levels
     
    melodium, Jun 23, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.