GA-7400 Pro2 Rev 2 (BIOS FK) CAS Settings

Discussion in 'Gigabyte' started by t mccool, Jul 3, 2005.

  1. t mccool

    t mccool Guest

    Looking for a way to adjust the CAS settings of my memory -- DDR-400
    PC3200 1024MB chips from PowerMemory (PQI) which POST confirms is DDR
    Dual Channel Enabled. From the menu within BIOS I can set the frequency
    manual but at percentages. However, I don't know what affect this would
    have on the CAS settings if anything. According to memtest the memory
    CAS settings are 2.5-4-4-8 when set to SPD within BIOS.

    I want to adjust to determine if the memory settings are causing some of
    instability problems when I adjust my CPU settings.....

    Any thoughts would be appreciated.
     
    t mccool, Jul 3, 2005
    #1

    1. Advertisements

  2. t mccool

    jpsga Guest

    Using CTL-F1 will allow you set up the memory manually.

    JPS
     
    jpsga, Jul 4, 2005
    #2

    1. Advertisements

  3. t mccool

    Youra nama Guest

    huh i thought it would only run 1 gig chips in pc2700 or under??
     
    Youra nama, Jul 31, 2005
    #3

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. memory problems - NF7-S rev.2.0 + Twinmos PC3200 , 512MB, Cas 2.5

  2. 7N400 Pro2 Rev 1 F11 BIOS

  3. Correct Bios Settings -- Advanced Chipset Features -- GA-7N400 PRO2

  4. 865PE Neo2-S CAS settings ignored

  5. CAS 2 vs. CAS 3 speed differences in RAM with Athlon 64?

  6. msi kt400 ultra + bios settings, it shows cas 2.5 instead of 2 when I boot.

  7. Fast RAM Cas 3 at Slower RAM CAS 2 speed

  8. DDR2 800 CAS 3 vs DDR2 1066 CAS 5

Loading...