Getting 400Mhz speed and 800Mhz FSB

Discussion in 'MSI' started by ofn01, Jan 28, 2005.

  1. ofn01

    ofn01 Guest

    I have a P4-3Ghz with HT and an MSI 865PE NEO-2 P MS-6728 Ver 2 (No
    D-bracket) 3.50 AMI BIOS. I have two sticks of Nanya 256MB dual channel DDR
    RAM (PC3200) 400MHz.

    If I added another two sticks in the other two spare DIMM slots (to give me
    1gb of ram) - would the FSB still be 800Mhz and the RAM still run at 400Mhz
    or do you need *just* two sticks in order to get 800Mhz FSB with this CPU
    and this motherboard?
     
    ofn01, Jan 28, 2005
    #1
    1. Advertisements

  2. ofn01

    sbb78247 Guest

    As long as the ram matches the original (timing, etc), then you should
    run in dual channel mode. The FSB is quad pumped (200x4) for the cpu,
    so that will not change (unless over clocking). The ram is going to
    stay at 400 too unless you start over clocking it too.

    Good luck.

    S
     
    sbb78247, Jan 28, 2005
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.