Help with memory issues on XPC SB61G2

Discussion in 'Shuttle' started by Tim Mavers, Jan 25, 2004.

  1. Tim Mavers

    Tim Mavers Guest

    I recently ran SiSoft Sandra 2004 Pro's memory benchmarking to see how fast
    some new PC3200 DDR ran. The results were:

    Memory Bandwidth Benchmark:
    Ram Bandwidth Int Buffered iSSE2 4468 MB/s
    Ram Bandwidth Float Buffered iSSE2 4458/MB/s

    I noticed under the Performance Tips sections that the follow tip was
    listed:

    Notice 5406 - System bandwidth appears memory limited. Attempt to use
    higher-performance memory

    System bandwidth appears to be memory limited. Generally this means that
    memory bandwidth is 50% FSB bandwidth, this CPU is starved. This generally
    indicates a mismatch between memory and system. Note that this does not
    indicate that memory timings are wrong, but the memory itself is slow.

    This new memory that I installed were 2 Infinion PC-3200 (400 MHz)
    Dual-Channel DDR DIMMs (1 GB per DIMM). Could I have something configured
    incorrectly in my BIOS? AFAIK, I have everything set to default (auto).

    Thanks,
     
    Tim Mavers, Jan 25, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.