1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

Help_got V92 command set for A21M modem?

Discussion in 'IBM Thinkpad' started by Carl, May 7, 2006.

  1. Carl

    Carl Guest

    can I just reset the s registers by going into a terminal program?

    what are the best settings? I am stuck with dial up and when at my
    base I frequently RUN at 1000 BAUD...really!

    My only ISP must have some funky modem(s). And I made them come out
    twice and check the line noise....

    I have two modem ..both internal...(I pull the PCMCIA when using the
    internal) ..the built in Xircom and a Xircom_Ethernet PCMCIA ( I
    no...I should have differentiated with a USR PCMCIA unit at least)

    The PCMCIA unit seems to run faster more consistantly.
     
    Carl, May 7, 2006
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.