i have the k7n2GM2-LSR - low CPU temp problem - diode under CPU on MOBO not reading properly or not

Discussion in 'MSI' started by ERIC SHAIK, Jan 21, 2005.

  1. ERIC SHAIK

    ERIC SHAIK Guest

    and it is a refurb -

    i find that most of the mobo utils from msi site dont work with this board ,
    they want a server board.

    i also smelled the funny phenolic stink the 1st day , but that may have been
    the new power supply.

    the main thing is invaled CPU temp.

    the little thermal diode under the cpu that presses up into it when the chip
    is seated reports a temp of like 55 or 60 deg F .. when room temp is about
    70 .

    so then the fan monitor doesnt spin it fast enough and the cpu sink gets
    real hot because the board thinks its cooler than it is !
     
    ERIC SHAIK, Jan 21, 2005
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Temp too high? 60C diode

  2. Did or does the P3V4X motherboard have faulty cpu temp reading issues?

  3. Opinions on MSI K7N2GM2-LSR

  4. Using PC3200 in K7N2GM2-LSR

  5. K7N2 Delta2-LSR or KT880 Delta-LSR

  6. My system just keeps reading the hard disk.... and reading.... and reading....

  7. Again on temperatures: diode vs non diode reading

  8. Is it possible to have a diode temp of 180° C and the system is still stable?

Loading...