IC7 BURNER CYBERDRIVE CW058D

[Emane]

impossible to have my cyberdrive CW058d burner working with IC7 board green led flashing regularly from power up then drive not recognized on W2K

this burner is ok on my other computer AMD

IC7
P4 3C not overclocked
2*256 samsung DDR at 2.7 v
ATI radeon 9700 pro
seagate barracuda ATA 100
toshiba DVD ROM

Help appreciated

 

[Emane]

forgot to say that i flashed IC7 AND cyberdrive to latest bios 1.5 and firmware 160D

 

[TomG]

tell us what IDE channel the drive is on and how the system is configured as far as the other drives? do you have the burner on SATA or what?

 

[Emane]

the burner is not on SATA.

I tried any combination of IDE
seagate HD on IDE 1 master burner on IDE 2 master
HD IDE1 master - Burner IDE1 slave
etc.. etc..

Thanks in advance
"TomG" a �crit dans le message de

tell us what IDE channel the drive is on and how the system is configured as far as the other drives? do you have the burner on SATA or what?

--

Thomas Geery
Network+ certified

ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP
This IP is dynamic so it *could* change!...
over 113,000 FTP users served!
^^^^^^^
...

 

[Goran Jacek]

I got hte same problem here :
My IC7 refuses to recognize correctly this burner
green led keeps flashing startint at power up till windows 2K launched and unable to find the burner.

 

[TomG]

how is the burner jumpered and on what kind of cable?

 

[Kev]

Help appreciated

I had similar problems - the abit forum ( http://forum.abit-usa.com ) has some mention of compatibility problems. The problem was intermittent when I was using the SATA interface as a RAID0 drive. The problem has stopped now that I am only using one IDE drive on IDE0. So it seems to be a compatiblity problem with Cyberdrive and Intel SATA chipset (?).

kev.

 

[John Lewis]

On Fri, 25 Jul 2003 13:54:59 +0100, "kev" wrote:

Help appreciated

I had similar problems - the abit forum ( http://forum.abit-usa.com ) has some mention of compatibility problems. The problem was intermittent when I was using the SATA interface as a RAID0 drive. The problem has stopped now that I am only using one IDE drive on IDE0. So it seems to be a compatiblity problem with Cyberdrive and Intel SATA chipset (?).

kev.

FYI:-

I have NEC ND-1100A and ND-1300A DVD-Burners on Parallel IDE1 Master and Slave on my IC7-G (BIOS 1.3 or 1.5). Nary a problem. Work perfectly as either DVD or CD burners (or readers).

John Lewis