IS7 usb

Danny Y · Jul 13, 2003

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager i have a: usb serial bus controller (which has a yellow warning symbol next to it) which when u open up properties says no driver has been installed

this is before or after insatalling the intel drivers that came with board.

Also the rest of the usb stuff 4 host controllers
and the 4 usb root hubs all under device manager are o.k

so did any of u with these boards have this as well? or is it just me

TomG · Jul 13, 2003

no issues on mine running XP with SP1 and all hotfixes. did you remember to load the Intel Inf Chipset drivers also?

h2so4 · Jul 13, 2003

Have you tried updating the driver via control panel/device manager/the dodgy device/properties?

John Lewis · Jul 13, 2003

On Sun, 13 Jul 2003 17:26:07 +0100, "Danny Y"
wrote:

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager i have a:
usb serial bus controller (which has a yellow warning symbol next to it) which when u open up properties says no driver has been installed

this is before or after insatalling the intel drivers that came with board.

Also the rest of the usb stuff 4 host controllers
and the 4 usb root hubs all under device manager are o.k ...

Somehow, you failed to load the USB2.0 driver.

Try deleting the yellow entry in device manager and reboot. It might go hunting for the driver. However, that is assuming that you have indeed already installed SP1, which contains the correct USB 2.0 driver.

John Lewis

Tim (5) · Jul 15, 2003

I had same problem with IC7 m/b. It disappeared when I click the "Scan for hardware changes". At that stage all the intel and other drivers were installed. Seems like it may be a dependancy issue - the driver for it is installed before the parent driver is installed, so all other USB devices appear.

HTH
- Tim

"John Lewis" wrote:

On Sun, 13 Jul 2003 17:26:07 +0100, "Danny Y"
wrote:

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager
i have a:
usb serial bus controller (which has a yellow warning symbol next to

it)

which when u open up properties
says no driver has been installed

this is before or after insatalling the intel drivers that came with

board.

Also the rest of the usb stuff 4 host controllers
and the 4 usb root hubs all under device manager are o.k

so did any of u with these boards have this as well? or is it just me

Somehow, you failed to load the USB2.0 driver.

Try deleting the yellow entry in device manager and reboot. It might go hunting for the driver. However, that is assuming that ...

Andrew Schulman · Jul 19, 2003

Danny Y wrote:

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager i have a:
usb serial bus controller (which has a yellow warning symbol next to it) which when u open up properties says no driver has been installed

this is before or after insatalling the intel drivers that came with board.

Also the rest of the usb stuff 4 host controllers
...

I have the same problem. Haven't been able to solve it yet. I'm running Win2K SP2. I've installed the Intel Inf drivers (whatever the hell those are, Abit just seems to assume that I know already or don't care) and rebooted, then gone through the "search for new driver" routine. But still USB is unavailable-- it has a yellow icon next to it in Device Manager and no driver is installed.

On the Abit site, there's a USB driver, but it's only for 9x. What's up with that?

Has anyone else out there gotten their USB working on an IS7 board running Win2K? If you have, I'd appreciate a description of how you did it.

Thanks,
Andrew.

--=[T.F]=-- · Jul 20, 2003

just choose install the driver from device manager and let it search automatic...from cd! regards Tommy

"Andrew Schulman" skrev i meddelandet

Danny Y wrote:

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager
i have a:
usb serial bus controller (which has a yellow warning symbol next to

it)

which when u open up properties
says no driver has been installed

this is before or after insatalling the intel drivers that came with
board.

Also the rest of the usb stuff 4 host controllers
and the 4 usb root hubs all under device manager are o.k

I have the same problem. Haven't been able to solve it yet. I'm running Win2K SP2. I've installed the Intel Inf drivers (whatever the hell those are, Abit just seems to assume that I know already or don't care) and ...

still

USB is unavailable-- it has a yellow icon next to it in Device Manager and no driver is installed.

On the Abit site, there's a USB driver, but it's only for 9x. What's up with that?

Has anyone else out there gotten their USB working on an IS7 board running Win2K? If you have, I'd appreciate a description of how you did it.

Thanks,
Andrew.

...

TomG · Jul 20, 2003

"Andrew Schulman" wrote:

Danny Y wrote:

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager
i have a:
usb serial bus controller (which has a yellow warning symbol next to

it)

which when u open up properties
says no driver has been installed

this is before or after insatalling the intel drivers that came with
board.

Also the rest of the usb stuff 4 host controllers
and the 4 usb root hubs all under device manager are o.k

I have the same problem. Haven't been able to solve it yet. I'm running Win2K SP2. I've installed the Intel Inf drivers (whatever the hell those are, Abit just seems to assume that I know already or don't care) and ...

still

USB is unavailable-- it has a yellow icon next to it in Device Manager and no driver is installed.

The Intel Inf drivers are drivers that tell the OS about the chipset and onboard devices contained within the chipset. As opposed to being negative about Abit and your lack of understanding of what something is, why not just ask a simple question?

On the Abit site, there's a USB driver, but it's only for 9x. What's up with that?

The other OS's did not need the driver, that's what. The driver for XP was contained in SP1 (final release of the driver anyway... there was a temporary release until SP1 came out)

Has anyone else out there gotten their USB working on an IS7 board running Win2K? If you have, I'd appreciate a description of how you did it.

I run XP Pro so I can't help you there...

R. Pazderski · Jul 22, 2003

I have a IC7 running Win2k-SP4 with (NO) problems including good sound quailty. All the Lastest Intel Drivers are installed.

Under the USB Section of Device Manager, there are (10) entries with (NO) yellow excalmation marks. Each device has the annotation "This Device is Working Properly". However, some of the devices have different sets of drivers.

Are all of these devices related to USB 2.0 and NOT USB 1.1 ?? The manual is unclear.

I am (ASSUMING) that if I connect a (TRUE USB 2.0 DEVICE TO ANY USB CONNECTION), it would be in some manner connected to the Hub and be running (TRUE USB 2.0).

Is this assumption correct ??
If not, is there a link for more IC7 USB 2.0 information ??

System Spec:
===========
Abit IC7 Retail Pack
Intel P4 2.80 Retail Pack
Corsair 2x256 XMS 3700
ATI 8000 Series 64 Meg 4X Video
USR V.92 HW FaxModem
LINKSYS 802.11G Wi-Fi
PROMISE TX2000 Raid
(4) WD 80/8 HDs on Promise in Stripe / Mirrror
(1) WD 120/8 (Dual Boot) IDE Primary
(2) HP R/W CDs IDE Secondary
(1) Sony FD
Antec 430 Watt TP PS
Logitech PS2 KB & Mouse
(All Cards are in Non Shared Slots)
(System will O/Ced as desired)
O/Ses are Win2K-SP4 for Network / Win98SE for Dos Utilities

Regards and Thanks,

Rick Pazderski Sr.

US
=========================>>>
"--=[T.F]=--" wrote:

just choose install the driver from device manager and let it search automatic...from cd! regards Tommy

"Andrew Schulman" skrev i meddelandet

Danny Y wrote:

Just wondered if any of u guys after installing a IS7
mobo had any usb probs.
After bootup and installing xp if i look in device manager
i have a:
usb serial bus controller (which has a yellow warning symbol next to

it)

which when u open up properties
says no driver has been installed

this is before or after insatalling the intel drivers that came with
board.

Also the rest of the usb stuff 4 host controllers
and the 4 usb root hubs all under device manager are o.k

I have the same problem. Haven't been able to solve it yet. I'm running Win2K SP2. I've installed the Intel Inf drivers (whatever the hell those are, Abit just seems to assume that I know already or don't care) and ...

still

USB is unavailable-- it has a yellow icon next to it in Device Manager and no driver is installed.

On the Abit site, there's a USB driver, but it's only for 9x. What's up with that?

Has anyone else out there gotten their USB working on an IS7 board running Win2K? If you have, I'd appreciate a description of how you did it.

Thanks,
Andrew.

...

TomG · Jul 22, 2003

all of them are true USB 2.0.