K7V MB and odd USB device behavior

Discussion in 'Asus' started by Robert A. Trifiletti, Jr., Dec 22, 2003.

  1. All,

    I hope you can shed some light on this odd behavior. I have an K7V MB with
    AMD 800 processor and 512 MB PC133 Ram (1x256 and 2x128). I have recently
    connected an IBM Optical mouse and when I do a shutdown and turn on, the MB
    hangs at boot right before the memory test and in fast doesn't spell that
    completely, usually i will get "Memory Te_" where the _ is the cursor.

    I remove the offending USB device and hit reset and am brought into the BIOS
    to adjust the DRAM frequency. I reset it to 133 MHz and the computer does
    the memory test fine. I then plug in USB device and comptuer is fine. Any
    idea on what to think about this situation? I am using BIOS 1007. The USB
    device has same effect on both upper MB USB ports. I have not tried on the
    USB break out card that is wired to MB.

    Thanks for your help..
    Bobby
     
    Robert A. Trifiletti, Jr., Dec 22, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.