- Joined
- Oct 1, 2003
- Messages
- 3
- Reaction score
- 0
My KD7-Raid died. I repalced the power supply and it still would not boot up. I replaced the KD7-Raid board with an old KX7-Raid board and the system would start up but windows would not load. I disconnected the mirrored raid drives and connected one of the drives to the IDE1 and windows would still not boot. I get a series of command lines listing multi (0) disk (0) rdisk (0) partition (1) \Windows\system 32\ drivers\
What do I have to do to get this to work. I thought that with the mirrored array any mirrored drive would be able to work as the boot drive.
Howard
What do I have to do to get this to work. I thought that with the mirrored array any mirrored drive would be able to work as the boot drive.
Howard
