KG7 lite settings

[firewall]

Hi all, finally i fixed stability problems with my kg7 lite and athlon 2000xp. my magic numbers are 6-5-7 in cpu slew rate section. i have still some errors (at the end of 5th test of memtest). i fixed these too raising vcore voltage to 1.825 and ddr to 2.83. could these parameters make trouble to cpu or dimm?

 

[Job60]

I think your settings will be ok ! You might try a few other combos of P/N values and maybe able to lower voltage . I had my Palamino running @1.725 lower than spec and had no problems , Well till I started raising the FSB . Its stable @144 FSB and 1.775 Vcore NoJOB@aol.

 

[firewall]

(Job60) wrote:

I think your settings will be ok ! You might try a few other combos of P/N values and maybe able to lower voltage . I had my Palamino running @1.725 lower than spec and had no problems , Well till I started raising the FSB . Its stable @144 FSB and 1.775 Vcore NoJOB@aol.

If i set super bypass wait state to 1 and Ram Timings to "normal" i havent anymore error on memtest 5 and i can use default voltage! 1.65 for cpu and 2.65 for ddr