Kt3 Ultra2 and Barton Xp2500+(AGP running at 84mhz!)

Discussion in 'MSI' started by Stephane Caron, Aug 20, 2003.

  1. Stephane Caron

    Stephane Caron Guest

    I changed my CPU today : went from a "PalominoXP1800+" to a "Barton Xp2500"
    running at 333Mhz but Sandra is telling me that my AGP bus is
    now running at 84 Mhz! instead of the recommended 66Mhz ,also the PCI bus is
    running at 42Mhz instead of 33Mhz ,i tried to find in the Bios an AGP and
    PCI multiplier setting but there is none to be found


    The system is running fine and stable but i wonder about the long term
    effect of running the AGP and PCI bus at these overclocked frequency ?

    Stef
     
    Stephane Caron, Aug 20, 2003
    #1

    1. Advertisements

  2. Stephane Caron

    LSASr Guest

    Sound like you did not use the fsb clock "plus 33" feature and just set the
    FSB to 166.

    Try revising the timing correctly.

    LSASr
     
    LSASr, Aug 21, 2003
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. KT3 Ultra2 Rev 1.0 and AMD 2600+ 333

  2. HELP:MSI KT3 ULTRA2(BIOS 5.7) and Barton XP2500+???

  3. MSI Kt3 Ultra2 AGP question!

  4. MSI KT3 ultra2 burned - replaced - works in the lab not in the office... (A long beeeep and then no

  5. KT3 Ultra2 and HDD data transfer rate whist creating DVD's

  6. Problem with USB mass storage and MSI KT3 Ultra2

  7. Will the MSI Kt3-Ultra2 run an Athlon XP 3200 (333/Barton).

  8. MSI KT3 ultra2 with 3000+ Barton upgrade.

Loading...