KT3 Ultra2 Rev 1.0 and AMD 2600+ 333

Discussion in 'MSI' started by alonzo, Jun 24, 2003.

  1. alonzo

    alonzo Guest

    Tried installing a AMD 2600+ 333fsb on my KT3 Ultra2 Rev 1.0 mainboard
    but could not figure out how to get it to run as a 2600+. Checked the
    MSI processor support page and the 2600+ 333fsb isn't listed but the
    2800+ 333fsb is listed. Flashed to the 5.7 bios but still no go. Is
    the 2600+ 333fsb not supported or is there some settings in bios I am
    missing.
     
    alonzo, Jun 24, 2003
    #1

    1. Advertisements

  2. alonzo

    bas alberink Guest

    I have the same board, CPU and bios version and all works well for me.
    Set the FSB in the bios to 166 and change the multiplier to AUTO. This
    should do the trick....
     
    bas alberink, Jun 24, 2003
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Kt3 Ultra2 and Barton Xp2500+(AGP running at 84mhz!)

  2. KT3 Ultra and AMD Athlon 2600XP+ 333 FSB

  3. HELP:MSI KT3 ULTRA2(BIOS 5.7) and Barton XP2500+???

  4. MSI KT3 ultra2 burned - replaced - works in the lab not in the office... (A long beeeep and then no

  5. KT3 Ultra2 and HDD data transfer rate whist creating DVD's

  6. Will the MSI Kt3-Ultra2 run an Athlon XP 3200 (333/Barton).

  7. 2600+ vs. 2600+ 333

Loading...