KT600 Dragon Plus v2.0 memory problem

Discussion in 'Soyo' started by Paul26134, Jan 2, 2007.

  1. Paul26134

    Paul26134 Guest

    I recently built a system with a KT600 Dragon Plus v2.0 and an AMD
    Athlon 2500+ CPU. I used a single 512MB stick of Kingston PC3200 RAM
    for several days, with no problems. I bought and installed a second
    (identical) stick of RAM. The PC booted and Windows XP (Control
    Panel/System) acknowledged the 1024MB of memory. Soon afterwards, I
    got a blue screen of death (PAGE_FAULT_IN_NONPAGED_AREA). Each time I
    would re-boot, this failure would occur again. I then tried all
    possible one & two stick combinations in the two available DIMM sockets
    and found the following:

    (1) I can use either of the 512MB sticks alone and everything is fine.
    (2) If I fill both sockets, I either can't boot or crash shortly after

    I tested the two sticks separately with memtest86 and discovered no
    Any ideas?
    Paul26134, Jan 2, 2007
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.