kt7a 1.3 xp2200 bootup issue

Discussion in 'Abit' started by fastback, Jul 7, 2003.

  1. fastback

    fastback Guest

    I thought the kt7a would run the xp 2200? I upgraded the bios but it
    hangs at the memory test with a blinking cursor. I replaced the old
    cpu and everything runs fine. Any idea? I'm running a western digital
    80gig if that has anything to do with it.
     
    fastback, Jul 7, 2003
    #1
    1. Advertisements

  2. fastback

    Wes Newell Guest

    It's trying to boot at 2000MHz. You can try to boot with your old cpu and
    set vcore to 1.85v and user defined multiplier of 7 and FSB to 100. Save
    and shut down. Put the 200+ in and try to boot. If you make it, go into
    bios and set accordingly. See Multiplier cross ref. in link below. BTW,
    that 7 will be remapped to 15 when you boot with the 2200+.
     
    Wes Newell, Jul 7, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.