More AN7 issues--POST 90 code

Discussion in 'Abit' started by Dave and Kim, May 9, 2004.

  1. Dave and Kim

    Dave and Kim Guest

    AN7
    Antec TruePower 380
    Mushkin dual channel 512 meg (256 x 2) PC 3500
    Maxtor 40G
    AMD 2800XP
    Windows XP Pro

    Help!!!

    After finally getting memory that would post, I started working to get my
    previous Windows installation repaired to accept the new mobo. Everything
    booted well using Knoppix so I know the parts worked. I powered down
    everything, disconnected all cables and connected all to a different
    electrical outlet not connected to a surge protector, monitor, mouse, and
    keyboard (later found to be in-op). I turned power to the power supply and
    the lights turned on on the mobo. I pushed the power on button and
    immediately got the 2 tone siren. I powered off quickly and let everything
    rest, checked to make sure the cpu fan was clear of wires (one appeared to
    slowing the fan) and turned all back on. Now on post I get a code 90 and it
    will not finish full post into bios. I have cleared CMOS several times,
    still no luck. What should I do NEXT?????
     
    Dave and Kim, May 9, 2004
    #1
    1. Advertisements

  2. Dave and Kim

    steve Guest

    Reseat the memory and all periph cards, and make sure the clear cmos jumper
    is in the correct position.
    After all that, Clear the cmos and try the boot again. I got a post 90
    and sirens once and I found my AGP card crooked in the socket.
    Also got a post 90 when I accidentally left the cmos jumper in the clear
    position after a bios upgrade.
     
    steve, May 9, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.