1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

new mb install/pwr problem

Discussion in 'AMD Thunderbird' started by WilcoxSE, Apr 27, 2004.

  1. WilcoxSE

    WilcoxSE Guest

    Hi folks,
    I'm setting up a new KT&a Raid board (with a XP2400+ cpu). I tested the mb
    first with memory, video card, cpu/heatsink fan etc.....all outside the case
    but plugged into power. My first boot attempt, the fan/heatsink came on for
    a second or two then powered down automatically. I shut everything off and
    made sure there was no obvious short...removed the heatsink/fan to make sure
    all was seated properly. Then I attempted a boot again and all booted fine.
    After installing the board into my new case and power supply...I began to
    get the same problem again. Any ideas what it could be?
    Thanks,
    scott
     
    WilcoxSE, Apr 27, 2004
    #1
    1. Advertisements

  2. WilcoxSE

    WilcoxSE Guest

    Hi guys...never mind......after testing everything....power
    supply...etc....it turned out to be the brand new fan I just bought. I
    installed another cheaper one I had on hand and now everything works fine.
    scott
     
    WilcoxSE, Apr 28, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.