NF7-S -Latest BIOS

Discussion in 'Abit' started by Peter Keasley, Nov 27, 2003.

  1. I am putting together a new system and have just installed the Rev2 m/b.
    Before loading Windows, I decided to update to the latest BIOS to see if I
    could get them to recognise my Athlon XP+ 2500 (Barton). But no such luck. I
    had to manually configure the settings to show 166fsb to get the correct
    processor speed of 1826mhz. Is this the correct procedure - or should the
    latest BIOS have adjusted the settings automatically?

    Thanks
     
    Peter Keasley, Nov 27, 2003
    #1
    1. Advertisements

  2. Peter Keasley

    rms Guest

    You should always set the jumpers manually to avoid such issues. BTW if
    your ram supports it, try 11x200 for a free 3200+ upgrade

    rms
     
    rms, Nov 28, 2003
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.