No PS/2 for the Dimension 9100

Discussion in 'Dell' started by Andrew J. Rozsa, Aug 27, 2005.

  1. Got a new 9100. It's a terrific box. Quiet, lots of fans and heat
    sinks, esthetically pleasing, superfast (compared to the 8200 I had),
    truly a serious upgrade, I think, even from the 8400. However, I got a
    couple of issues I need help with. The machine is stepping away from
    legacy I/O so there are no PS/2, serial, or parallel ports.

    I have used a NorthGate Ultra (now Avant Stellar) keyboard for 17
    years and don't really want to get away from it. I like the
    clickyness, the layout, the nice heavy feel, and the size. I am a poor
    typist, so transitioning to a plastic, mushy keyboard is a disaster
    for me. The new $100 wireless keyboard/mouse combo I just got is
    awful. I got a little plug that supposedly "converts" a PS/2 plug into
    a USB plug. Tried it with the keyboard but it doesn't work with the
    Dimension 9100.

    Question No. 1: What is the solution for the above? a) port
    replicator; b) PCI card with a PS/2 port? c) any other ideas?

    Question No. 2: The 9100 doesn't have a cable select cable (CSC). Just
    a one-connector ribbon for the Serial ATA drive. Can I replace it with
    a CSC so I can add a second hard-drive (the IDE from my old machine)?

    Sure would appreciate some help with this.

    TIA.
    Best,

    Andrew

    --


    Birmingham, Alabama, USA
    lid
     
    Andrew J. Rozsa, Aug 27, 2005
    #1
    1. Advertisements

  2. Andrew J. Rozsa

    Ted Zieglar Guest

    You couldn't be a worse typist than I am.

    I can help you with the keyboard question, but I have no experience - yet - with SATA drives.

    It takes more than a simple adapter to plug a PS/2 keyboard into a USB port. Your keyboard lacks the chip needed to make PS/2 output work with USB. It's an easy fix though: Just buy a PS/2-to-USB converter cable. It's a Y-cable with two wires for connecting PS/2 devices (typically a mouse and a keyboard) and 1 USB wire to plug into your computer's USB port.

    Ted Zieglar

    "Andrew J. Rozsa" <> wrote in message news:...
    > Got a new 9100. It's a terrific box. Quiet, lots of fans and heat
    > sinks, esthetically pleasing, superfast (compared to the 8200 I had),
    > truly a serious upgrade, I think, even from the 8400. However, I got a
    > couple of issues I need help with. The machine is stepping away from
    > legacy I/O so there are no PS/2, serial, or parallel ports.
    >
    > I have used a NorthGate Ultra (now Avant Stellar) keyboard for 17
    > years and don't really want to get away from it. I like the
    > clickyness, the layout, the nice heavy feel, and the size. I am a poor
    > typist, so transitioning to a plastic, mushy keyboard is a disaster
    > for me. The new $100 wireless keyboard/mouse combo I just got is
    > awful. I got a little plug that supposedly "converts" a PS/2 plug into
    > a USB plug. Tried it with the keyboard but it doesn't work with the
    > Dimension 9100.
    >
    > Question No. 1: What is the solution for the above? a) port
    > replicator; b) PCI card with a PS/2 port? c) any other ideas?
    >
    > Question No. 2: The 9100 doesn't have a cable select cable (CSC). Just
    > a one-connector ribbon for the Serial ATA drive. Can I replace it with
    > a CSC so I can add a second hard-drive (the IDE from my old machine)?
    >
    > Sure would appreciate some help with this.
    >
    > TIA.
    > Best,
    >
    > Andrew
    >
    > --
    >
    >
    > Birmingham, Alabama, USA
    > lid
     
    Ted Zieglar, Aug 27, 2005
    #2
    1. Advertisements

  3. 1) this should do the trick....
    http://tinyurl.com/bw9y5
    2) the thin data cable you see between the motherboard and the hard disk is
    a sata (serial ata) type cable. if you want to add a second sata drive you
    need another drive and cable and to connect the cable to one of the four
    7-pin sata connectors on the motherboard. if you want to attach a pata
    (parallel ata, aka an ide type drive found in your 8200) you can connect it
    to the ide controller that the cd rom drive(s) in your system are connected.
    if you already have two cd rom drives on that cable then you can remove one
    to temporarily connect the hard drive and copy your data to the new drive.

    "Andrew J. Rozsa" <> wrote in message
    news:...
    > Got a new 9100. It's a terrific box. Quiet, lots of fans and heat
    > sinks, esthetically pleasing, superfast (compared to the 8200 I had),
    > truly a serious upgrade, I think, even from the 8400. However, I got a
    > couple of issues I need help with. The machine is stepping away from
    > legacy I/O so there are no PS/2, serial, or parallel ports.
    >
    > I have used a NorthGate Ultra (now Avant Stellar) keyboard for 17
    > years and don't really want to get away from it. I like the
    > clickyness, the layout, the nice heavy feel, and the size. I am a poor
    > typist, so transitioning to a plastic, mushy keyboard is a disaster
    > for me. The new $100 wireless keyboard/mouse combo I just got is
    > awful. I got a little plug that supposedly "converts" a PS/2 plug into
    > a USB plug. Tried it with the keyboard but it doesn't work with the
    > Dimension 9100.
    >
    > Question No. 1: What is the solution for the above? a) port
    > replicator; b) PCI card with a PS/2 port? c) any other ideas?
    >
    > Question No. 2: The 9100 doesn't have a cable select cable (CSC). Just
    > a one-connector ribbon for the Serial ATA drive. Can I replace it with
    > a CSC so I can add a second hard-drive (the IDE from my old machine)?
    >
    > Sure would appreciate some help with this.
    >
    > TIA.
    > Best,
    >
    > Andrew
    >
    > --
    >
    >
    > Birmingham, Alabama, USA
    > lid
     
    Christopher Muto, Aug 27, 2005
    #3
  4. On Sat, 27 Aug 2005 04:11:55 GMT, "Christopher Muto"
    <> wrote:

    >:|1) this should do the trick....
    >:|http://tinyurl.com/bw9y5


    Put an order right in. Seems to fit the ticket precisely.

    >:|if you already have two cd rom drives on that cable then you can remove one
    >:|to temporarily connect the hard drive and copy your data to the new drive.
    >:|


    I thought it out. So as not to give them fits if I need help (which is
    rare with Dells), I decided to get an external USB box and stick the
    old drive in it. With USB 2.0 transfer seems pretty quick. Definitely
    at par with the 1394s I had on the 8200. I can live with that, plus
    I'll have a portable drive for backups.

    >:|"Andrew J. Rozsa" <> wrote in message
    >:|news:...


    >:|> Question No. 1: What is the solution for the above? a) port
    >:|> replicator; b) PCI card with a PS/2 port? c) any other ideas?
    >:|>
    >:|> Question No. 2: The 9100 doesn't have a cable select cable (CSC). Just
    >:|> a one-connector ribbon for the Serial ATA drive. Can I replace it with
    >:|> a CSC so I can add a second hard-drive (the IDE from my old machine)?


    Thank you very much, Christopher. I appreciate the thoughtful and
    quick reply.

    Best,

    Andrew

    --


    Birmingham, Alabama, USA
    lid
     
    Andrew J. Rozsa, Aug 27, 2005
    #4
  5. On Sat, 27 Aug 2005 04:11:55 GMT, "Christopher Muto"
    <> wrote:

    >:|http://tinyurl.com/bw9y5


    Oh, yea... thanks for the tinyURL pointer, too. Checked it out (always
    willing to learn something new). Nifty idea. Stuck it to my Links.

    Best,

    Andrew

    --


    Birmingham, Alabama, USA
    lid
     
    Andrew J. Rozsa, Aug 27, 2005
    #5
  6. Andrew J. Rozsa

    Error 404 Guest

    Andrew J. Rozsa <> wrote:
    > Got a new 9100. It's a terrific box. Quiet, lots of fans and heat
    > sinks, esthetically pleasing, superfast (compared to the 8200 I had),
    > truly a serious upgrade, I think, even from the 8400. However, I got a
    > couple of issues I need help with. The machine is stepping away from
    > legacy I/O so there are no PS/2, serial, or parallel ports.

    CUT
    > Sure would appreciate some help with this.


    like this:
    http://www.networktechinc.com/usb-ps2.html




    --
    ...........
     
    Error 404, Aug 27, 2005
    #6
  7. On Sat, 27 Aug 2005 00:11:01 -0400, "Ted Zieglar" <>
    wrote:

    >:|You couldn't be a worse typist than I am.


    Stricktly a hunt-and-pecker. My son howls with laughter when he sees
    me type. But, somehow, over the years, I managed to type up about 11
    thousands documents and proly an equal number of emails/articles. ;-)

    >:|I can help you with the keyboard question, but I have no experience - yet - with SATA drives.


    See Christopher's insightful advice.

    >:|
    >:|It takes more than a simple adapter to plug a PS/2 keyboard into a USB port. Your keyboard lacks the chip needed to make PS/2 output work with USB. It's an easy fix though: Just buy a PS/2-to-USB converter cable. It's a Y-cable with two wires for connecting PS/2 devices (typically a mouse and a keyboard) and 1 USB wire to plug into your computer's USB port.


    NOW you tell me. But, seriously, I now know the error of my ways and
    ordered a converter cable.

    >:|> Question No. 1: What is the solution for the above? a) port
    >:|> replicator; b) PCI card with a PS/2 port? c) any other ideas?
    >:|>
    >:|> Question No. 2: The 9100 doesn't have a cable select cable (CSC). Just
    >:|> a one-connector ribbon for the Serial ATA drive. Can I replace it with
    >:|> a CSC so I can add a second hard-drive (the IDE from my old machine)?


    Thanks, Ted. I really appreciate your help and that you took the time
    to reply.

    Best,

    Andrew

    --


    Birmingham, Alabama, USA
    lid
     
    Andrew J. Rozsa, Aug 27, 2005
    #7
  8. On Sat, 27 Aug 2005 06:11:14 GMT, "Error 404" <> wrote:

    Thank you "Error." That's exactly what I learned I need. 'Cept the
    people at NetworkInc charge $36.00 for the converter that you can get
    for $9.95 from Sewell Direct http://tinyurl.com/bw9y5

    >:|Andrew J. Rozsa <> wrote:

    [....]
    >:|> couple of issues I need help with. The machine is stepping away from
    >:|> legacy I/O so there are no PS/2, serial, or parallel ports.
    >:|CUT

    [....]
    >:|like this:
    >:|http://www.networktechinc.com/usb-ps2.html


    Appreciate the input.

    Best,

    Andrew

    --


    Birmingham, Alabama, USA
    lid
     
    Andrew J. Rozsa, Aug 27, 2005
    #8
    1. Advertisements

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
  1. Guest
    Replies:
    0
    Views:
    1,420
    Guest
    Apr 12, 2005
  2. Shel
    Replies:
    2
    Views:
    559
    Edward J. Neth
    Jul 1, 2005
  3. Jeniffer

    Need advice on CPU power needs for a Intel Core 2 Duo E6600

    Jeniffer, Nov 19, 2006, in forum: Motherboard Purchase Recommendations
    Replies:
    0
    Views:
    556
    Jeniffer
    Nov 19, 2006
  4. fentual

    Core 2 duo e6600 not running how i like it.

    fentual, Jun 27, 2007, in forum: Motherboard General Discussion
    Replies:
    1
    Views:
    630
    fentual
    Jun 27, 2007
  5. ahfei

    Motherboard that can support 2 processors?

    ahfei, Jun 2, 2008, in forum: Motherboard General Discussion
    Replies:
    3
    Views:
    1,433
    richgardon9
    Jul 7, 2008
  6. whatsupdude2007

    custom computer, and i need usb 2.0, help?

    whatsupdude2007, Mar 22, 2009, in forum: Motherboard General Discussion
    Replies:
    0
    Views:
    758
    whatsupdude2007
    Mar 22, 2009
  7. whipersGhost

    2 speaker stereo not shown in audio Device

    whipersGhost, Aug 2, 2012, in forum: Motherboard General Discussion
    Replies:
    0
    Views:
    1,420
    whipersGhost
    Aug 2, 2012
  8. SignTech
    Replies:
    0
    Views:
    233
    SignTech
    Feb 21, 2017
Loading...