no video after power on

Discussion in 'Shuttle' started by kevinchung.chan, Jun 18, 2005.

  1. kevinchung.chan

    kevinchung.chan Guest

    This is the replacement AB60R from mwave and it has the same problem as
    the previous one. There is no video after power on. I am using a
    GeForce2 MX-400 4X AGP video card ,P4 - 1.6GHz, 512MB PC2100 DDR (one
    piece). I just connect the MB with CPU, RAM, AGP and power but nothing
    else to make sure that there is no other conflict. Is there anything
    wrong with the Hardware I use or am I need to set anything on the MB?
    Please help.
     
    kevinchung.chan, Jun 18, 2005
    #1

    1. Advertisements

  2. kevinchung.chan

    luke1411 Guest

    Do you have an ATX power suply?
    had same problem, needed to get a new power suply with the secondary 4
    prong plug that connects next to the cpu
     
    luke1411, Jul 23, 2005
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. UPDATE: NF7-S won't power-up after power-down

  2. KV8 PRO Fails to power up after reboot... Works after CMOS Clear.

  3. P4B does not boot after power ON but boots on soft power ON

  4. P4P800-E no Power-On after shutdown or on bios-setup & power-off

  5. Tiger MPX S2466-4M: Windows Froze; After Power-Off/Power-On Nonstop Beeping

  6. OT: How to make PC power up automatically after power interruption?

  7. Sun Blade 100 won't power up after power failure

  8. Boot fails after shutdown, works after power off.

Loading...