Not able to get to bios, monitors are not captured

Discussion in 'Asus' started by kaibab, Mar 2, 2014.

  1. kaibab

    kaibab

    Joined:
    Mar 2, 2014
    Messages:
    1
    Likes Received:
    0
    With Maximus III Formula motherboard and Intel Core i5 Processor, I am unable to get any video. Have tried a Radeon X300 SE in PCI Express x16 slot and an old PCI board in a PCI slot. Monitors don't react. There are four red LEDs near the main power (24 pin) connector and the VGA LED stays lit red. Have tried two monitors (Dell and HP) and have tried both DVI and 15-pin VGA connections. The monitor light stays amber. No beeps from tiny speaker. Can anyone suggest a next step?
     
    kaibab, Mar 2, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Laptop With Dual Monitors

  2. Dual monitors w/ 4700c form factor

  3. MBUltra133 (PDC20276) Bios not installed because there are no drives attached

  4. What are BIOS mods and what are they intended for?

  5. Toshiba Tecra 8000 not able to connect to net.

  6. ASUS M4N7A: Only able to use 3 out of 5 SATA ports

  7. x4270 , not able to change Boot Order in LSI utility

  8. Bios shows memory sticks, which are not there | Prime X299-A

Loading...