P4DC6+: which temperatures on which sensors?

Discussion in 'Supermicro' started by Guest, Jun 25, 2005.

  1. Guest

    Guest Guest

    My P4DC6+ m/b has w83627hf health chip the supports 3 temperature sensors,
    one for the motherboard and one for each CPU.

    The output from lm_sensors (in Linux) is shown below. The m/b sensor is
    apparently temp1. How can determine which CPU temperature is reflected by
    temp2 and which by temp3?

    Thanks.

    ----------------------

    w83627hf-isa-0290
    Adapter: ISA adapter
    VCore 1: +1.49 V (min = +1.42 V, max = +1.57 V)
    VCore 2: +3.26 V (min = +1.42 V, max = +1.57 V)
    +3.3V: +3.25 V (min = +3.14 V, max = +3.46 V)
    +5V: +4.73 V (min = +4.73 V, max = +5.24 V)
    +12V: +11.92 V (min = +10.82 V, max = +13.19 V)
    -12V: -11.62 V (min = -13.18 V, max = -10.88 V)
    -5V: -2.08 V (min = -5.25 V, max = -4.75 V)
    V5SB: +5.32 V (min = +4.73 V, max = +5.24 V)
    VBat: +3.18 V (min = +2.40 V, max = +3.60 V)
    fan1: 0 RPM (min = 2848 RPM, div = 2)
    fan2: 0 RPM (min = 2848 RPM, div = 2)
    fan3: 0 RPM (min = 1424 RPM, div = 4)
    temp1: +29°C (high = +50°C, hyst = +45°C) sensor = thermistor
    temp2: +31.5°C (high = +65°C, hyst = +60°C) sensor = thermistor
    temp3: +29.5°C (high = +65°C, hyst = +60°C) sensor = thermistor
    vid: +1.500 V (VRM Version 9.0)
    alarms: Chassis intrusion detection ALARM
    beep_enable:
    Sound alarm disabled
     
    Guest, Jun 25, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.