P4SPA+ Dual Channel DDR 3200

Discussion in 'Supermicro' started by Marty, Sep 1, 2003.

  1. Marty

    Marty Guest

    I have just assembled a system based in the P4SPA+. I am using
    Crucial 512MB PC3200 DDR memory modules, I flashed the BIOS to 1.0a.
    In order to have the memory subsystem run in Dual Channel mode it says
    to populate dimm slots 1,3 and / or 2,4. When I populated slots 1 and
    3 (The Blue Slots) I ran into all sorts of problems. I could not
    install windows as I received multiple file copy errors and finally
    the memory error long beep at startup to indicate a bad module. While
    I couldn't load the OS with both modules, it would work somewhat with
    either module in slot 1. However I would still expierience booting
    problems. When I placed the modules in slots 2 and 4 all of the
    problems went away and the system has not had problems booting once.
    Any insight into this would be appreciated.
     
    Marty, Sep 1, 2003
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.