P4VXASD2 V1.1a - RAM Upgrade problem

Discussion in 'ECS' started by jminesh, Jan 22, 2007.

  1. jminesh

    jminesh

    Joined:
    Jan 22, 2007
    Messages:
    1
    Likes Received:
    0
    Hi,
    I have P4VXASD2 v1.1a motherboard with P4 CPU. Operating system - Windows 2000 Professional.
    Before I was using SDRAM (256MB) but because of applications demanding more RAM, I decided to go with 1GB DDR. I bought 1GB PC3200 DDR-400 Crucial Technology RAM. On the motherboard, I changed the jumper settings from J1 open to J1 Short. I also changed the jumber setting of J2A/B/C/D and J3A/B/C/D from open to short.
    When I put the DDR ram and take out the SDRAM, It boots properly but the windows does not load. It keeps giving me blue screen.
    "Cannot read registry....Hive error" (not the exact error message).

    Any help would be appreciated.

    Thanks in advance
    Minesh
     
    Last edited: Jan 22, 2007
    jminesh, Jan 22, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.