P5STE Memory over 64MB

Discussion in 'Supermicro' started by glrumble, Mar 21, 2005.

  1. glrumble

    glrumble Guest

    Has anyone had success installing more than 64MB ram in an STE board?
    No matter what I do I can not get the system to recognize memory over
    64MB.

    I’m using 4 identical 72-pin EDO SIMMs of 32MB each. Bank 0 seems
    fine because when just 2 SIMMs are installed (bank 0) the system
    ackowledges the 64MB ram. Adding the other 2 SIMMs in banks 1 or in
    bank 2 results in the system still only acknowleding 64MB ram. No
    errors are ever shown during the POST. The problem is not the SIMMs
    themselves as I’ve already tried each SIMM in bank 0 and I always end
    up with 64MB.

    CMOS settings are set to optimal.

    Any suggestions?
    Thanks.
     
    glrumble, Mar 21, 2005
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.