Please help recommend a 600w+ PSU with 30amp on the 12V rail!!

Discussion in 'Technical Support' started by polok, Sep 13, 2007.

  1. polok

    polok

    Joined:
    Sep 13, 2007
    Messages:
    4
    Likes Received:
    0
    guys after your helpand advice please!!

    need to source a PSU that will run my new AGP X1950 Pro but I've been told I need a PSU that will run 30 amps on the 12v rail. Looked at my existing PSU and it's only 18 amps

    Can you please recommend me one that's pretty quiet but more importantly not too pricey. Was looking at not spending much more than ?50-?70 tops.

    Really appreciate your input, nothing worse than having a new upgrade and not being able to fit it 'cos your dependant on another part and you don't know which one to get!!

    Cheers
     
    polok, Sep 13, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. For Multiply Video Chat I Recommend Use SplitCamera.com

  2. WTB very badly 500GB SATA 3GB/s HDD-recommend me one please!!!!

  3. Fans Spin with 24-pin, 12v Causes Stop

  4. ATX 12V 8pin connector wont power CPU

  5. PSU requirement help.

  6. 3 volt hot , rail and ground need help shorted out mobo

  7. please help me finding out the isuue with my rig

  8. 12v rail showing 5v or less in BIOS

Loading...