Power supply fan

Discussion in 'Supermicro' started by Mr Ter, Nov 30, 2003.

  1. Mr Ter

    Mr Ter Guest

    I have a P6DBE mob in a supermicro case. Unfortunately I had to change the
    power supply to a new one. The problem is that the moment I connect the
    power supply fan wire to the socket on the mob I get continuous beep. I've
    noticed that the power supply fan wire has only two wires where as the
    socket has 3 pins. Does anybody know what I can do to get rid off this
    beep. I'd like to get the PW connected so that its fan can be turned on.

    Thanks - Tom
     
    Mr Ter, Nov 30, 2003
    #1
    1. Advertisements

  2. Mr Ter

    daytripper Guest

    Your only shot is to look in the bios setup for the fan monitoring section and
    see if you can selectively disable warnings for that fan socket...
     
    daytripper, Nov 30, 2003
    #2
    1. Advertisements

  3. Mr Ter

    Mr Ter Guest


    Thanks for your suggestion I'll try to see if this can be done.
     
    Mr Ter, Dec 1, 2003
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.