PTGD1-LA-'cd in' 4 pin too narrow

Discussion in 'Asus' started by jimmy461, Jul 22, 2007.

  1. jimmy461

    jimmy461

    Joined:
    Jul 22, 2007
    Messages:
    2
    Likes Received:
    0
    I am trying to install a TV card
    the 3 wire, 4 hole floppy power connector to the 'cd in' from the TV card doesn't fit into the cd in on the PTGD1. The female connector from the TV card is the regular size but the male 4 pin connection on the motherboard is too narrow for the connector.
    Neither of the CD drives use this connection, they both use the IDE cable and the power connection.
    The lad at the computer store offered I should try the card without the 4 pin cable thinking the sound would be communicated to the motherboard without it. That doesn't work. The picture from this TV card is great but there is no sound. The sound from the other programs is still great.
    I have the diagrams of this motherboard and the best I can read is this is the motherboard connection to use but it is too narrow for the standard connection given with the card.
    Someone please help me.
    Thank you.
     
    Last edited: Jul 22, 2007
    jimmy461, Jul 22, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 4-pin to 8 pins power converter cable for CPU

  2. ASUS A8N-E Motherboard. ChipFan too slow causing PC to Crash!?

  3. Is the CPU too hot?

  4. Fans Spin with 24-pin, 12v Causes Stop

  5. ptgd1-la Goldfish FRONT_PANEL

  6. compaq dl580 server power supply pin out?

  7. ptgd1-la Mobo, question about PCI slot.

  8. Phenom X4 9850 running too hot or is it normal?? PLEASE HELP!

Loading...