Raid add-on card doesn't pause during post

Discussion in 'Technical Support' started by todd, Nov 2, 2020.

  1. todd

    todd

    Joined:
    Nov 2, 2020
    Messages:
    1
    Likes Received:
    0
    Hi,

    I have a p8z77-vlk running the last bios released. I have a sa-p822 raid controller card.
    while the controller card initializes and sees the correct raid arrays, during post the startup sequence is supposed to pause and allow the user to hit the F2 or F8 key to go into a menu page or continue with the boot process. do I have a bios setting wrong that would cause the post process to skip past the pause for the keypress?
     
    Last edited: Nov 2, 2020
    todd, Nov 2, 2020
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Popping noise during bootup, then USB mouse goes out!

  2. Rnadom Blank screen during gameplay

  3. Tyan 28XX motherboard freeze during large file transfers

  4. P6N SLI V2 sometimes doesn't post

  5. Tyan S2882 Server Doesn't POST

  6. code 2A error during POST

  7. Add external SATA drive to SATA RAID 1

  8. Trying to get S2518 working with add-on PCI video card

Loading...