Ram Problem

Discussion in 'AOpen' started by Anonymous, Oct 28, 2004.

  1. Anonymous

    Anonymous Guest

    Hi

    I have the AOPEN MX3W motherboard and recently purchased a RAM upgrade. It
    is a PC100 SDRAM (64Mb's). Unfortunately my pc keeps crashing with
    bluescreens now. Often the system will not even boot up. Do I need to
    change the SDRAM timing in the system BIOS to get this RAM working? I have
    tried running with the original RAM and it works fine. Just the new chip,
    won't even start.

    Thanks
     
    Anonymous, Oct 28, 2004
    #1

    1. Advertisements

  2. Anonymous

    c Guest

    Make sure the RAM isn't high density. This type of RAM seldom works with the
    older boards. You can usually check the manufacturer site for info.

    Chris
     
    c, Oct 28, 2004
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is corsair xms 3200c2 ram good ram for the NF7-S

  2. NEW install of RAM, bug. [WAS: No boot after installing RAM]

  3. 4 GB RAM Tuning feature to see 4GB RAM in XP

  4. Re: 4 GB RAM Tuning feature to see 4GB RAM in XP

  5. A7A266 with SD-RAM or DDR-RAM

  6. i875p Canterwood does not see 4GB RAM - Sees 3GB RAM

  7. BIOS-setup-problem / RAM-upgrade-problem with Kayak XW/450 W3

  8. Gigabyte K8N PRO - RAM Problem Raid Problem Answers here

Loading...