1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

Re: noobie o/c'ing

Discussion in 'Overclocking' started by ~misfit~, Aug 4, 2008.

  1. ~misfit~

    ~misfit~ Guest

    Somewhere on teh intarweb "Dumbo" typed:
    > I have previously had a couple of AMD PC's which I toyed with, an
    > Opteron144 (ran at 2.6GHz) and an FX55 (which just wouldn't run above
    > 2.6GHz), and I decided to try an Intel based system. I bought
    > an Asus Striker Extreme mobo and Q6600 (been assured it ran at 3.5GHz
    > on air in a P5K board) with a Freezer 7 Pro cooler and 2 Gig of DDR2
    > 800 ram (Corsair PC6400 TwinX). I bought this mobo because it was an
    > ROG board and thought it would overclock with ease. How wrong I
    > was. I tried upping the memory, FSB and vcore voltages but it all
    > still fails above 2.8GHz. I so wanted a 3GHz System for gaming
    > etc.... My vista score is 5.3 because of my slow Hitachi 500GB SATA
    > hard drive but memory is good for 5.8 (915 MHz overclock at standard
    > voltage).
    > How do I figure out What is holding me back? The CPU goes to 2.8GHz
    > at standard voltage but no higher (except temp) when I increase
    > vcore! Even after lowering the memory ratio and increasing the FSB
    > the whole lot bogs down. Is it a dud board or bad BIOS version (1305)
    > for overclocking. I thought spending extra on the mobo would mean
    > better overclocking than a p35 Gigabyte or the likes.


    P35 is the best chipset for overclocking Intel CPUs. Check all the 'world
    records' and see what chipset they use....
    --
    Shaun.

    DISCLAIMER: If you find a posting or message from me
    offensive, inappropriate, or disruptive, please ignore it.
    If you don't know how to ignore a posting, complain to
    me and I will be only too happy to demonstrate... ;-)
     
    ~misfit~, Aug 4, 2008
    #1
    1. Advertisements

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
  1. Larry Webb
    Replies:
    7
    Views:
    616
  2. Ron
    Replies:
    5
    Views:
    327
  3. fatboy
    Replies:
    9
    Views:
    579
    Craig Grocott
    Nov 23, 2003
  4. Clint
    Replies:
    7
    Views:
    462
    Asestar
    May 1, 2004
  5. johns

    nVidia 6800 noobie help

    johns, Nov 28, 2005, in forum: Nvidia
    Replies:
    1
    Views:
    324
  6. tawen

    Need help w/ IAR 8051 C/Assembler!!!

    tawen, Sep 27, 2006, in forum: Motherboard General Discussion
    Replies:
    0
    Views:
    866
    tawen
    Sep 27, 2006
  7. jacatone

    How do P.O.S.T. cards work?

    jacatone, Apr 20, 2010, in forum: Motherboard General Discussion
    Replies:
    1
    Views:
    1,148
    onadal
    Sep 2, 2010
Loading...