Replaced paper pickup in LJ III, now paper jam

Discussion in 'HP' started by Jeff Fox, Dec 23, 2003.

  1. Jeff Fox

    Jeff Fox Guest

    I just replaced the paper pickup assembly with one from a donor machine.
    When I run the self test I get a paper jam error. The paper
    pickup does not move at all. The relays on the module on the right side
    both click once.
    I can turn the gears manually on the paper pickup and get a piece of paper
    to move through the paper path.

    My guess is there is a way to index the paper pickup after re-assembly
    but I don't know how. I have turned the paper pickup to several different
    orientations between tests but same results.

    Any ideas?
    Jeff Fox, Dec 23, 2003
    1. Advertisements

  2. Did you plug the motor connector back in? [if you unplugged it]

    __ __ __ __ __
    Regards, Chris
    [spamblock used]
    Chris Prestwich, Dec 24, 2003
    1. Advertisements

  3. Jeff Fox

    Jeff Fox Guest

    Well of course .... Doh!

    Amazing how I missed that, thanks a lot!
    Jeff Fox, Dec 24, 2003
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.